Fop 4M Systems® 35 l backpack

The 4M FOP 35 l Assault Backpack meets everything that extreme conditions equipment should meet and adds a lot of extra improvements.The backpack has a capacity of 35 l, such a volume is especially suitable for shorter patrols or special operations.The main storage area is divided into two chambers.The smaller chamber is located at the front of the backpack, the main at the back.

Full content available in seconds

The main chamber is very well available even in difficult conditions due to the zip that runs all the way around the main chamber.It's not a problem to open the entire backpack very quickly and get to the contents of the main pocket of the backpack in a matter of seconds.A simple and fast system is especially appreciated when every second counts and you don't have time for a lengthy search of equipment on individual pockets.This improvement will be appreciated by all who must have everything quickly accessible. The system is ideal for specialists and medical professionals.The main pocket contains an internal MOLLE compatible binding, so you can attach additional equipment directly to the inner area of the backpack.

Comfort even in the most difficult conditions

The backpack is designed to be not only maximum practical, but also comfortable.It is designed to make carrying a backpack comfortable even under full load. The back of the backpack is additionally improved by a flexible partition, which is strong enough to conceal the sharp edges of items inside the backpack.That way, your back will remain fine even if you carry bulky equipment in your backpack that would be very difficult to transport in an ordinary backpack.The back is perfectly protected against the unpleasant pressures and bumps of the equipment inside the backpack, thanks to a protective panel.

Practical in first place

The product is equipped with several MOLLE compatible ties.Thanks to these, you can add additional pockets and pouches, which you will need during the operation. MOLLE compatible binding is found on the sides of the backpack, on the front and on the waist belt.It's not a problem to add extra equipment to the backpack according to the individual needs of the user.In addition to MOLLE compatible bindings, the backpack also offers velcro panels, which allow you to customize your inner pocket configuration according to personal preferences.In addition, there is a 1 internal zip-fastened mesh pocket in the main chamber of the backpack and 1 zip-fastened textile pocket for small equipment and necessary documents.

Set your backpack to size

The carrier system allows you to adjust the compression shoulder strap for each user.In addition to shoulder straps, belt tightening can also be set.The backpack is so suitable for all types of characters.Anyone can find the right configuration.You can simply replace the classic shoulder straps with an extended variant of the BACS shoulder straps and waist belt (Body Armour Compatible System) in case you also use a ballistic vest.Stability and securing of shoulder straps in place is ensured by a chest strap.

Room for other tactical additions

In case you are about to transport a larger amount of equipment, additional required cases can be attached to MOLLE compatible bindings on the outside of the backpack. In addition, you can attach a concealed PDW weapon case (on front velcro bands; personal defense weapon = weapon for personal defense, such as CZ Scorpion EVO).On the back there is a 1 internal mesh pocket zipped and 1 textile pocket zipped for small equipment and necessary documents.You can increase the total backpack volume up to 60 l. If it rains, you'll definitely appreciate a very quick-access pocket for the raincoat.They will also find use of space on the top of the backpack, which is used to thread cables from the radio station or attach hydration bag.

Drop backpack lightly

Another advantage of this backpack is also the fast drop system.This will allow you to simply and quickly drop the entire backpack in case of an emergency.The advantage of this system is that after throwing the pack on the body, a waist belt remains with equipment placed on it.It makes sure you don't lose the equipment strapped to your waist in an emergency.The backpack is designed for extreme conditions and all materials used are extremely strong.

Adjust carrying capacity to fit

The carrying capacity of the pack has been tested to 40 kg, making sure the pack can withstand a really high load, however the recommended weight carried of the material should reach a maximum of 15 kg.If you need to carry heavier loads, the manufacturer recommends adding more weight-bearing backpack straps Expedition 60.The carrier system is ready for replacement, so the straps can be simply removed and replaced with more durable straps.

Benefits you need to know about : 

• a backpack for one - three days long missions 
• resistant materials 
• designed for extreme load ( tested for 40kg)
• easily accessible pockets 
• reinforced back 
• MOLLE compatible 
• raincover at the bottom 
• BACS - body armour compatible system 
• adjustable shoulder straps 
• adjustable waist belt 
• chest strap 
• quick release system 
• adjustable side straps 
• hydration bag compatible 
• front velcro panel 
• protective panel at the back against sharp objects 
• main chamber : 2 way covered zipper
•                           2 smaller pockets inside(one mesh, and classical fabric one)
•                            inner MOLLE binding 
•                            inner velcro panels 
•                            2 removable straps 
• front pocket : 2-way waterproof zipper 
•                       velcro straps 
•                       2 smaller pockets inside( one mesh, and classical fabric one)