The tactical flashlight PD36R PRO / 2800 Im Fenix is an ideal choice for professionals, armed forces and hunting. Due to its robustness, it is also suitable for use on long weapons. All parameters of the flashlight, such as luminous flux, impact resistance, water resistance, afterglow and battery operation time, are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Li-ion battery and USB-C connector The flashlight is powered by one Li-ion battery type 21700, which is included in the package and is charged directly in the flashlight via a modern USB-C connector. The battery will supply energy for dozens of hours of lighting. To charge, unfold the rubber cover of the connector on the side of the flashlight and plug in the USB-C cable, plug the other end into a PC, USB adapter, electrical network or car. During charging, the side indicator lights up red, when fully charged, it lights up green.
Battery charge status indication About three seconds after switching on, the flashlight always indicates the battery charge status. Green means full charge (100 % - 85 %), green flashing more than half charge (85 % - 50 %), steady red (50 % - 25 %) and red flashing means a critically discharged battery. When the battery is low, the flashlight will automatically switch to lower brightness modes.
Intelligent protection against overheating Due to the fact that the flashlight achieves a high output, the temperature rises. If the temperature exceeds 60 degrees Celsius, the power will be automatically reduced. This will prevent damage to the flashlight. As soon as the temperature drops, it is possible to use the highest power again.
Memory and 6 illumination modes The Fenix LED flashlight uses a dual tactical switch that allows easier control in emergency situations. For example, it can be turned on directly into stroboscopic mode. The flashlight's memory will also be of great use, thanks to which it will always turn on in the last mode (except for the strobe). The Fenix flashlight has 6 illumination modes.
Easy to control To turn on/off, press the larger button located at the end of the flashlight. By pressing the secondary button, you can switch between lighting modes at any time during operation. To switch to flash mode, hold the button for about half a second. Press and hold the switch button to turn the flashlight directly into strobe mode.
Effective help in crisis situations The head of the Fenix LED flashlight is equipped with a striking tip. It can thus be effectively used in a crisis situation to break glass or self-defense.
Benefits you need to know about: 6 illumination modes powerful LED Luminus SFT-70 intelligent protection against overheating charge status indicator the package includes the Fenix ARB-L21-5000 battery USB-C charging cable wrist strap belt holster spare o-ring removable clip for safe and easy wearing waterproof and dustproof according to the IP68 standard robust design also suitable for use on long weapons
Do you like the product?
Buy Fenix® PD36R PRO / 2800 Flashlight for € 132
Add to shopping cart
Measured to ANSI FL 1 standard in laboratory conditions, using rechargeable battery Fenix ARB-ARB-L21-5000, at temperature 21 °C (+/- 3 °C) and humidity 50 % - 80 %. Values may vary depending on conditions, settings used or different brands of batteries.
Mode
Luminous flux (lm)
Distance (m)
Runtime
Intensity(cd) (cd)
Eco
30
40
42 h
400
Low
150
90
19 h
1 900
Medium
350
130
8 h 15 min
4 300
High
1 000
225
3 h 55 min
12 800
Turbo
2 800
380
3 h 30 min
36 600
Stroboskop
2 500
-
-
-
The Turbo mode is measured in total of runtime including output at reduced levels due to temperature or protection mechanism in the design.