Kryer is a quality outdoor backpack ideal for day trips, hence the number 24 name.With a capacity of over 25 litres, they belong to medium packs. Kryer is solid and durable, made of quality and modern materials.It is state-of-the-art and only good brand YKK metal zippers® and branded plastic buckles and DuraFlex buckles® UTX®.
Adequate capacity and care for drinking regimen
The main chamber is zipped to a two-way zip and can be opened either completely to gain clear access to the entire contents, or - if we don't have enough space to put the backpack on and don't want to dump the contents - leave the side compression straps on and thus gain access to the contents of the main chamber through a half-open backpack. On the inside of strong there are <>2 pockets of the mesh main chamber side inner hydration bag pocket.It is netted, has an open upper entrance that can be pulled down with a brake cord and is secured with a hook in the middle at the top.The hook can be easily disengaged, opening the pocket completely to insert the hydration bag.The bag can be fastened at the top either by default with Velcro strips, or - if we don't have tape holes in the bag - we use a handcuff to attach it to a bag suspended just on a hook in the middle. Above the pocket there is a elongation hole in the backpack hydration tubes.The main chamber alone is with no further subdivision and is fairly bulky.
Extra gear space
On the front of the pack there is a 1 large pocket fastened to a two-way zip, which can be opened all the way down on both sides and so open as a trap door. Inside on the back above hides 1 shallow padded net pocket fastened to the zipper, due to the padding and the fine lining, a small tablet can be stored here, without fear of scratching the display case., it is also padded and so is ideal for a larger tablet or netbook, for example, and on it is a sewn-on internal organizer – 4 small pockets for small items and 6 small slats of varying width suitable for stationery, tactical pen, closing knife, multitool, flashlight or even small notepads and the like.On the sides are 2 straps with a carbine for hanging keys and other small items that we want to be securely attached and readily available. On the opposite side we find a deep mesh pocket zipped up. Na zipped up external pockets we have a front outer pocket zipped up with a padding and a delicate lining, suitable for example for goggles and similar things. side profile. The outer mesh pockets with an elastic band on the inlet are ideal for a drink bottle.But if we prefer a hydration bag, these pockets can be used for almost anything.
Any other options?
Of course I do.Just below the pocket for the glasses are 2 Velcro belts for attaching anything with Velcro, not just patches, but even lightweight cases.We also have stitched loops in front on both sides to attach fittings, for example with a carabiner. On the shoulder straps above we have “D” rings (1 on each strap) to attach additional fittings.And most importantly - on both hips and on the front, almost everywhere, there are laser cut slits, that are fully compatible with MOLLE. So we can attach to the backpack any equipment with straps for this wearing system.Other options provide a compression elastic cord with a plastic brake on the front and compression straps on the sides - on each side 1, are pulled through the "D" buckle in the middle and fastened by a fast-buckle.These not only give the backpack a nice and sleek shape when fully loaded, but we'll also use them to grab other items, like light jackets and the like.
Easy to deploy, quick to remove
The backpack is worn classically on the back, no novelty to be expected.The backpack simply belongs on the back and therefore has 2 shoulder straps.The Kryer 24 backpack is anatomical, padded and netted on the inside.They are adjustable and unzipping, so the backpack is enhanced by a so-called quick release - it can be removed from the back very quickly if needed.Another feature is the height adjustable chest strap.This is also quite common today, but this one is sliding smoothly, in sliding "rails," without the need for complex modification. It has of course, and a adjustable length and can be unzipped using a fast-buckle.The backpack is also fitted with a lumbar belt, adjustable and unfastening, as well as a chest strap.All straps are labeled as strap keepers - handcuffs on the loose ends of the straps so that they don't hang unsightly everywhere. The rigid upper handle is part of the shoulder straps and will assist in carrying the pack in the hand as well as lifting and settling it on the back. Lower handle along with the upper handle will facilitate overhead transfer, for example by crossing the ford.
Comfort use
On the back of the pack is padding, 4 panels of foam covered with netting, the panels are slightly higher, so air can circulate between the pack and our backs and we don't sweat. The back of the pack are also anti-slip and inside is strong. The items stored inside at the back of the pack do not press into the back.Attention is also paid to the bottom of the pack, bottom is modified with silicone (it's basically rubberized) and so is water resistant and easy to clean.So it's no problem to put the backpack on a wet or not-quite-clean surface. 2 drainage holes in the bottom of the backpack provide drainage of condensed internal moisture as well as any spilled fluids.Also on the burst hydration bag is thought to be – fluid will not stay in the backpack to soak up everything we carry.Simply oozes through the hole prepared at the bottom of the pack / pouches.
|
Backpack material |
500D Nylon Cordura® |
|
Strap material |
nylon 420 |
|
Zips |
YKK® |
|
Buckles and buckles |
DuraFlex® UTX® |
|
Manufacturer |
Pentagon Tactical® |
|
Color |
Black |
Benefits you need to know about:
I know.
- sturdy and resilient backpack
- for single-day, maximum two-day outdoor activities
- capacity between 25 l and 30 l
- good quality and modern materials
- high-end processing
- branded YKK metal zippers®
- DuraFlex branded plastic buckles and buckles® UTX®
- main chamber fastened to a two-way zip
- 2 inner pockets of netting fastened to the zipper at the front
- inner hydration bag pocket on the back
- large outer front pocket fastened to a two-way zip
- 2 inner pockets of zip-fastened netting – 1 deep at the front and 1 shallow padded at the back
- 1 deep pocket with open top entrance on the back and internal organizer
- 2 carabiner straps
- front outer eyeglass pocket - finely padded, zipped up
- low-profile side outer pockets of open top mesh with elastic band
- 2 velcro belts under a pocket for glasses
- tooling on the front on both sides
- “D” rings on the shoulder straps above
- compression and attachment elastic cord on front with plastic brake
- compression straps on the sides with plastic buckle
- MOLLE compatible - slits laser cut on the sides and front
- anatomical padded shoulder straps with netting on the inside – adjustable, unbuttoning (quick release system)
- adjustable (sliding) chest strap with plastic fastener
- length adjustable lumbar belt with plastic buckle
- strap keepers on all straps - free-end tabs
- rigid upper handle of shoulder strap components
- handle above and below - easy to carry overhead (over water)
- on the back 3D netting / padding (4 foam panels covered with netting), anti-slip treatment and detachable strengthening plate
- bottom of backpack modified with silicone (rubberized) for water resistance and simple cleaning
- 2 drainage holes in the bottom of the backpack
- A hole in the bottom of the pocket for the hydration bag
- Made in Vietnam